Dirty Porcelain Floor Tile and Grout Deep Cleaned in Eynsford
The picture below shows a grubby Porcelain tiled floor at a property in Eynsford just North of Sevenoaks. Installed throughout much of the ground floor including the kitchen, lounge, and dining room the porcelain tile and grout was in a very dirty state and the client was desperate to get them clean.
The floor had trapped dirt in the high traffic areas and the grubby appearance was bringing down the appearance of the area which was a shame as the kitchen was lovely. The client had tried all the usual household cleaners she could find, and nothing seemed to work so we were asked to call round.
I visited the property to survey the floor and was able to reassure the client that although the tile and grout was stained with dirt that it could be rectified. I was confident we would soon be able to get the floor looking great again and demonstrated the process I would use on a small part of the floor. The demonstration went well and happy with the result we agreed on a date for my return to complete the work.
Deep Cleaning a Porcelain Tile Floor
To deep clean the Porcelain tile and grout a strong dilution of Tile Doctor Pro-Clean (3 parts cleaner to 5 parts water) was sprayed onto the floor and then left to soak in for a good twenty minutes. This delay allows the Pro-Clean to get to reach into the pores of the tile and grout where it can break down the dirt.
Then using a rotary floor machine fitted with a black scrubbing pad the solution was scrubbed into the tile lifting out the dirt and turning the cleaning solution black in the process. Tile Doctor Pro-Clean is a concentrated, multi-purpose high-alkaline cleaner which is designed for deep cleaning tiles, stone and grout of dirt and grease and can also remove sealers. Exactly what was needed on this floor.
Pads can struggle to reach into the recesses of the grout line so once I was finished with the tiles, I hand scrubbed the grout with a wire brush. This is harder work, but the results justify the effort. The floor was then rinsed with water and the resultant soil was extracted off the floor with a wet vacuum. The tile and grout looked instantly better, and I knew the client would be pleased with the result.
Most Porcelain floor tiles are sealed in the factory when they are manufactured, so there was no need to apply a sealer in this case. I did however recommend the use of Tile Doctor Neutral Tile Cleaner for maintenance cleaning, it’s concentrated a small amount goes a long way, and it has a nice fresh fragrance. This will ensure the floor is kept in good condition moving forward.
As you can imagine my client was relieved to have the floor looking as good as new again!
Professional Restoration of a Porcelain Tiled Floor in North Kent
Dirty Porcelain Floor Tile and Grout Deep Cleaned in Eynsford Read More »